Cosmopol EL-VI UPRC M2 Glue Reactivating Machine For Shoe

Accelerated evaporation tunnel with automatic linear transport. With a combined system of evaporation and final reactivation, allows to obtain, on the soles and on the bottom of shoes / boots, a perfect reactivation before their coupling for the press process. The working cycle is carried out in 4 zones, load - evaporation - reactivation - discharge. 1 - LOAD: The operator who smear glue has 6 trolleys destined for contemporary transport of sole and shoe-boots, which are traveling side by side. 2 - EVAPORATION: The sole and the shoe-boot enter into a tunnel and are hit by strong jets of air which are designed to accelerate the evaporation of the solvent of the adhesive. The solvent eliminated in the tunnel is recovered and evacuated through a duct. 3 - REACTIVATION: Sole and shoe-boot, pass under a heating parable. The heating that is the principle of reactivation, can be diversified in accordance that it is for the sole or for the shoe-boot. 4 - UNLOADING: The sole and the shoe-boot are taken by the operatore directly from the machine ready to be coupled and pressed. The accelerated process of evaporation of the solvent (about 3 minutes against the traditional 25-30) allows a saving of lasts, and a reduction of the spaces dedicated to evaporation. DEVICE PT - Optional, the reactivation is also carried out in the toe / heel area where there is the need to stick decorations or reinforcements used especially in sports footwear.